HPI 15105 Nitro Star G3.0 Nitro Engine W/Pull Start Nitro MT2 G3.0

HPI Racing 15105 Nitro Star G3.0 Engine w/Pull Start Firestorm

This is the HPI Nitro Star G3.0 Engine with Pull Starter used in the HPI Fire Storm

Features:

• Composite body rotary valve carburetor with 5.5mm bore
• Silver colored cooling head SG (pilot) type crankshaft
• Two year limited warranty

Includes:

• HPI Nitro Star G3.0 Engine with Pull Start, instruction manual, R5 cold glow plug (HPIG1504), foam air cleaner assembly with four zip ties, brass collet

Requires:

• Fuel: Car blend with 20-25% nitro content Misc Items: Fuel tubing and track equipment

Specs:

• Specs such as horsepower, bore, stroke and RPM were not provided- contact HPI for further infomation
• High Speed Needle Setting: Turn clockwise in 1/8 turn increments to lean fuel mixture. Do not exceed 2-1/2 turns from flush
• Idle Adjustment: Adjust for about 0.04″ (1mm) gap between slide valve and carb body at bore opening Low Speed Needle: No adjustment recommended
• Displacement: .18 cu in (3.0cc)