Scalextric C8515 DPR Digital Chip Conversion 1/32 Slot Car Easy Fit

Scalextric C8515 DPR Digital Chip Conversion

The Scalextric EasyFit Digital Plug offers a ‘plug and play’ solution to convert your Scalextric DPR (Digital Plug Ready) cars from analog to work on your Scalextric digital track system. The plugs can also be transferred easily from one car to another with no need for a soldering iron or modeling expertise. DPR Scalextric cars to be digitized in under sixty seconds.

Scalextric Digital
Scalextric Digital represents a groundbreaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane. At the press of a button, drivers can switch lanes for overtaking and blocking!

EasyFit Digital Plug
Most Scalextric cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars. 
The conversion only requires a small screwdriver and takes less than sixty seconds to perform.

To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.

Other Notes
C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug.
Many non-DPR Scalextric (and other brand cars) can be converted to Scalextric Digital using the Digital Chip C7005.